Can new cables go through an existing fire seal?
- Every seal labelled and photographed
- BM TRADA / FIRAS-certificated contractors
- Written price before any work
Open a riser cupboard in a block that had fibre broadband put in last year and look at the batt round the cable tray. Quite often there is a new white or black cable going straight through the middle of it, with a slit in the batt above and below where it was pushed in, and a ring of open air round it.
Nobody meant any harm. The installer had a cable to get from the basement to the fifth floor and the batt was soft enough to push through. But the seal now has a hole in it, and once the riser is painted nobody can see it.
New cables can go through an existing seal. How depends on what the seal is.
In batt and mastic, a neat slot is cut, the cable passed, any gap packed with batt offcut, and intumescent mastic worked round the new cable on both faces to the depth on the data sheet. With pillows, one or two are lifted out and pushed back tight round the new cable, which is why pillows suit risers where cables change often. Resealable putty is opened and pressed back. A mortar fill is core drilled to just over the cable size and the gap sealed with mastic or a cable sleeve.
A cable never goes through a pipe collar.
Whichever it is, the seal gets a fresh photo and a line on the schedule. If you manage a building where installers are booked in, give them the number on the label and ask for before and after photos of each seal they open.

Send the postcode, the type of building and a photo with a tape measure in it. We will come back with what it needs and a rough price.